Service Mode Tools Version 1 050exe
Click Here > https://blltly.com/2tAPov
How to Reset Canon Printers with Service Mode Tools Version 1 050exe
If you have a Canon printer that is showing an error code 5B00, it means that the waste ink counter has reached its limit and needs to be reset. This can be done by using a software called Service Mode Tools Version 1 050exe, which is a tool designed to enter the service mode of Canon printers and perform various maintenance tasks.
In this article, we will show you how to download and use Service Mode Tools Version 1 050exe to reset your Canon printer and clear the error code 5B00. Please note that this tool is not intended for end users and should be used with caution, as it may damage your printer if used incorrectly. Also, this tool is not available from Canon's official website, so you will have to find it on the web from a reliable source[^1^] [^2^].
Steps to Reset Canon Printers with Service Mode Tools Version 1 050exe
Download Service Mode Tools Version 1 050exe from a trusted link[^2^]. This is a Windows executable file that does not require installation.
Connect your Canon printer to your computer with a USB cable and make sure it is turned on.
Run Service Mode Tools Version 1 050exe as administrator. You should see a window like this:
Select your printer model from the drop-down menu and click "Main".
Wait for the tool to detect your printer and enter the service mode. You should see a message like this:
Click "EEPROM Clear" to reset the waste ink counter.
Click "EEPROM" to print a report of the current settings and confirm that the waste ink counter has been reset.
Turn off your printer and disconnect the USB cable.
Turn on your printer again and check if the error code 5B00 has disappeared.
Conclusion
Service Mode Tools Version 1 050exe is a useful software that can help you reset your Canon printer's waste ink counter and clear the error code 5B00. However, this tool is not official and may pose some risks to your printer if used improperly. Therefore, we recommend you to follow the steps above carefully and use this tool at your own risk. Alternatively, you can also contact Canon's customer support or take your printer to a service center for professional assistance.
What is Service Mode and Why Do You Need It
Service mode is a special mode that allows you to access and modify some of the settings and functions of your Canon printer that are not normally available to users. For example, you can use service mode to reset the waste ink counter, adjust the print head alignment, clean the ink absorber, or update the firmware.
You may need to enter service mode if your printer is malfunctioning or displaying an error code that cannot be resolved by normal troubleshooting methods. However, service mode is not meant for regular use and should only be used when necessary and under the guidance of a qualified technician. Entering service mode incorrectly or changing the wrong settings can cause serious damage to your printer or void your warranty.
How to Enter Service Mode on Different Canon Printer Models
The steps to enter service mode may vary depending on your Canon printer model. Here are some of the common methods for different printer series:
For G series printers (such as G2000, G2100, G2200, etc.), you need to press and hold the Stop button, then press and hold the Power button. Release the Stop button while holding the Power button, then press and release the Stop button four times. Finally, press and hold the Stop button again and release both buttons together[^3^].
For imageRUNNER ADVANCE series printers (such as C3320, C3325, C3330, etc.), you need to press and hold the Home button for about five seconds until you see a wrench icon on the screen. Then, swipe left on the screen until you see a gear icon. Tap on it and enter "7654321" as the password[^2^].
For PIXMA series printers (such as MP280, MP230, MG2500, etc.), you need to press and hold the Resume button, then press and hold the Power button. Release the Resume button while